Payment & Shipping Terms:
|Name:||C6150 Lathe Machine||Max. Swing Over Bed:||500mm|
|Max. Length Of Workpiece:||750/100/1500/2000/3000mm||Max. Swing Over Cross Slide (mm):||300mm|
|Max. Swing In Gap (mm):||720mm||Section Of Turning Tool:||25*25mm|
|Main Motor Power:||4KW||Spindle Hole:||52mm|
manual cnc lathe,
manual engine lathe
C6136 C6236 C6140 C6240 Conventional Lathe Machine Universal Lathe Gap Lathe
1.Bed rail by super audio quenching and precision grinding.
2.Precision grinding of the main shaft box, low noise.
3.More thread type.
4.Electrical safety performance is good, high reliability.
5.With electromagnetic brake, the color of available options.
1. This series lathe machine is suitable for internal and external turning , tapering , and other rotating faces, metric , module and inch threads , as well as drilling and pull oil slot, widely used in axial and plates processing.
2. Width of bed is 312mm, with high hardness on guideway , the guideway is through high-frequency quenching , wear-resisting .
3. This machine is easy to operate , with rapid device for carriage , design with single hand wheel to operate.
4. The strength and rigidity of machine is higher than normal lathe machine , high efficiency, power of the machine makes cutting easily.
5. Whole machine test before delivery, make sure the machine has high stability and more reliable.
|Max. Swing over bed||mm||400||500|
|Max. Swing over tool post||mm||230||330|
|Max. Swing in gap||mm||560||660|
|Effective gap length||mm||200||200|
|Max. Length of work piece||mm||750/1000/1500/2000||750/1000/1500/2000|
|Width of bed||mm||360||360|
|Through-hole of spindle||mm||52/62||52/62/82|
|Range of spindle speeds||r/min||40-1600||40-1400|
|Cross tool post travel||mm||200||180|
|Compound tool post travel||mm||95||95|
|Tail stock center travel||mm||140||140|
|Tail stock sleeve taper||MT4||MT4|
|Range of metric threads||mm||0.25-14||0.25-14|
|Range of inch threads||40-2n/1’’||40-2n/1’’|
1. What is your minimum order quantity and warranty?
MOQ is one set, and warranty is one year.
2.What CNC system do you use?
FANUC, SIEMENS, MISTSUBISHI, GSK etc. It depends on your choice.
3.When is the delivery time?
We will delivery it within 40 days after received your payments.
4. How to handle the warranty period?
During the warranty period, because of product quality problems, the company is responsible for free maintenance, if need to change parts, we be responsible for free replacement.
If the machine problem is not belonging to our machine quality problems, when the buyer needs us send engineers to give repairing service, we charge the appropriate cost.
5.Can your company send the technical personnel to our company and direct our workers for free?
When the machine arrive the buyer’s installation site, we timely send mechanical and electrical engineers to install according to the buyer's schedule, the buyer undertakes board and lodging of personnel abroad in the process of installation, and also USD100.00 per day per person. The seller will cooperate with the buyer to deal with visa and installation preparation before going abroad.
6.Do your products support trade assurance?
Yes, our products are all supported.
Contact Person: Jeny