Payment & Shipping Terms:
|Name:||Lathe Machine||Max. Swing Over Bed:||500mm|
|Max. Length Of Workpiece:||750/100/1500/2000/3000mm||Max.swing Over Carriage:||210mm|
|Max. Swing In Gap:||720mm||Width Of Bed:||400mm|
manual metal lathe,
manual engine lathe
Horizontal Type Manual Lathe Machine with Max. Swing Over Bed 400mm
* This series lathe machine is suitable for internal and external turning , tapering , and other rotating faces, metric , module and inch threads , as well as drilling and pull oil slot .
* Width of bed is wider than normal lathe machine , with high hardness on guideway , the guideway is through high-frequency quenching , wear-resisting .
* This machine is easy to operate , with rapid device for carriage , design with single hand wheel to operate .
* The strength and rigidity of machine is higher than normal lathe machine , high efficiency , suit for heavy duty machining .
1, CA series ordinary horizontal lathe is used to turning internal and external cylindrical surface, conical surface, and other rotating surface, turning various metric and inch, modulus and pitch thread, and the pitch diameter of the thread and pull the drilling and oil tank etc., is general very strong horizontal lathe, Widely applicable batch processing of various shaft and disc parts.
2, The series lathe bed width in general lathe, 400mm rail width has higher stiffness, rail surface by intermediate frequency quenching, wear-resistant durable.
3, Handy machine operator concentration, slide plate is provided with a quick moving mechanism. Using single handle operation, humanization.
4, The rigidity of the machine tool structure and the transmission stiffness are higher than the general lathe, the power utilization rate is high, which is suitable for the strong cutting.
5, Before leaving the machine tool factory, the machine tool is tested strictly according to the inspection procedure, and the machine tool is tested to ensure that the machine tool has good stability and reliability.
|Max. swing over bed||400mm||500mm||610mm||660mm||800mm|
|Max. swing over carriage||210mm||300mm||370mm||400mm||540mm|
|Max. swing in gap||630mm||720mm||830mm||880mm||1020mm|
|Max. effective length in gap||210mm|
|Max. length of workpiece||750/1000/1500/2000/2200/3000/4000mm|
|Width of bed||400mm|
|Section of turning tool||25*25 mm|
|Main spindle motor||7.5kw(10HP)|
|Spindle bore||52mm (B: 80mm),(C: 105mm)|
|Spindle taper||No.6(MT6)(90 1:20)[113:20]|
|NO. of feed||(64 kinds)(for each)|
|Range of metric threads||(1-192mm) (44 kinds)|
|Range of inch threads||(1-24tpi) (21kinds)|
|Range of module threads||0.25-48 (module 39 kinds)|
|Range of diametral pitch threads||1-96DP (37 kinds)|
|Max. tailstock spindle travel||150mm|
|Tailstock spindle diameter||75mm|
|Taper of tailstock spindle centre hole||1-96DP (37 kinds)|
|Packing dimensions (L*W*H)|
|Overall dimensions for 750mm||2440*1140*1750mm|
|Overall dimensions for 1000mm||2700*1140*1750mm|
|Overall dimensions for 1500mm||3200*1140*1750mm|
|Overall dimensions for 2000mm||3700*1140*1750mm|
|Overall dimensions for 2200mm||4030*1140*1750mm|
|Overall dimensions for 3000mm||4800*1140*1750mm|
|Overall dimensions for 4000mm||5680*1140*1750mm|
|Overall dimensions for 750mm||2100||2170||2300||2400||2520|
|Overall dimensions for 1000mm||2200||2260||2380||2580||2720|
|Overall dimensions for 1500mm||2380||2450||2577||2830||3000|
|Overall dimensions for 2000mm||2750||2800||3000||3050||3300|
|Overall dimensions for 2200mm||2800||3000||3150||3400||3500|
|Overall dimensions for 3000mm||3300||3500||3600||4000||4220|
|Overall dimensions for 4000mm||3500||3800||3950||4600||
1:How can I choose the most suitable machines ?
A: Please tell me your specifications ,I can choose the best model for you , or you can choose the exact model .
You can also send us the products drawing ,we will choose the most suitable machines for you .
2: What's your main products of your company?
A: We specialized in all kinds of machines ,such as lathe machine ,cnc lathe machine ,milling machine ,cnc milling machine ,vertical machining center ,drilling machine ,radial drilling machine ,sawing machine ,shaper machine and so on .
3: Where is our factory located? How can I visit there?
A: Our factory is located in Tengzhou City ,Shandong Province,277500 China. You are warmly welcomed to visit us.
4. What is your trade terms?
A:FOB, CFR and CIF all acceptable.
5: What's the Payment Terms ?
T/T ,30% initial payment when order ,70% balance payment before shipment ;
Irrevocable LC .
6: What's the MOQ?
A: 1 set .(Only some low cost machines will be more than 1 set )
Contact Person: admin