1500*3000mm CNC Plasma Cutting Machine with Power Source for 20mm

1500*3000mm cnc plasma cutting machine with power source for 20mm

Features:

1. All-welded structure, Y,X axis with rack and linear guide drive,Z axis with electric automatic lifting,to assure cutting speed and quality.
2. X Y Z axis with leadshine drive , stable performance .
3. The set-up is very simple, all kinds of CAD graphics can be read directly by our system trough U-disk. The software can be edict graphics automatically.
4. Collocated U-disk interface and cutting code auto converting software for CAD drawing ,CAD drawing can be input directly into the cutter through U-disk.
5. Tips for each operation is displayed at the screen at any moment ,so operators can use our system without being trained or reading the instructions.
6. Collocated indicator lights for various hitches.Hitch diagnosing is clear just at a glance and the maintenance is convenient and quick.
7. There are necessary keys for the movement control in the torch carriage ,so the operator can easily move the torch to the right spot.
8. With break point or interruption of power ,memory function.

 

We use 3 layers package

1 The inside layer,the machine is covered by thickenning platic for waterproof .

2 The middle ,the machine is covered by foam ,to protect the machine for shaking and hitting.

3 The outside we use the International standard plywood box for exportation.

1. The normal machine has been adjusted correctly before shipment.

2. You will be able to use the machine immediately.

3. You will be able to get free training suggestions about our machines on our machines.

4. You will also get free advice and consultation, technical support, and service via email/fax/telephone as well as lifetime technical support.