Interchangeable Roll Forming Machine,
C Z Purlin Roll Forming Machine,
25m/Min Cold Bending Machine
Galvanized Steel Profile C Channel Cold Roll Forming Machine Roll Former c z purlin bending machine
Main technical parameters
If you have specific requirements, that's no problem,We can meet all your needs.
|1||Suitable material||color steel sheet, galvanized steel sheet, aluminium sheet|
|2||Material width||1250mm or as your required|
|3||Material thickness||0.3-0.8 or as your required|
|4||Working speed||8-12m/min, can be 20-25m/min|
|5||Main motor power||5.5kw with cycloidal with reducer|
|6||Hydraulic pump power||4kw|
|7||Electrical control system||PLC control system with inverter|
|9||Roller station||15 rows, depend on your panel profile drawing|
|10||Roller||high grade 45# steel, hard chrome plating|
|11||Working time||24 hours|
|13||Cutting head material||Cr 12 mould steel with quenched treatment|
|14||Voltage||380V 3Phase 50Hz or as your required|
|16||The machine size||7000mm*1500mm*1500mm
Machine Overview :
C,Z purline adopt high strength steel plate and shaped after cold forming, it has wall thickness homogeneous, size and dimension can be adjusted, big compression strength ect characteristics. The C purline machine which after cold forming, although the section dimension is light, it corresponds with carrying capability’s feature for roof purline and makes steel’s mechanical efficiency into full playing. It can make the C,Z purline can lighten the construction roof’s weight, reduce project steel quantity. So it becomes economic high efficiency steel. It is new building material instead of angle iron, channel steel, steel tube and tradition purline. C,Z purline and light metal tile using together is the best choice for light steel construction.
Automatic Change Size Customized C & Z Purlin Roll Forming Machine can produce purlins into C, Z and U shape automatically, all the purlin sizes can be set on PLC control screen, and produce corresponding size under the program setting task. Our Automatic Change Size Customized C & Z Purlin Roll Forming Machine is strong for producing thick hot rolled coil and GI, cold rolled coil, compare to manually type change purline roll forming machine, it can save human cost and time cost much.
Main Features of C/Z Purlin Roll Forming Machine
1 C/Z Purlin machine can produce both C Purlin and Z Purlin. The C change into Z operations is easy.
C purlin size width range: 80-300mm, and Z purlin size width range:120-300. Also the C/Z Purlin can be designed according to customers requiry.
2 C/Z Purlin machine can adjust the both C size and Z size quickly ,by adjust backboard , and very easy operation.
3 The cutting parts no need to change the mold, just by adjust certain size, it can cutting the Purlin properly.
4 C/Z Purlin machine can save much of the workshop place.
1. 5 Ton Passive Decoiler
1) Structure of pedestal, braking, mandrel holder, slider narrow and expanding
2) Capacity of decoiler:5Ton
3) Max. width: 500mm
4) Inner diameter for coil: 440mm-530mm
5) Out diameter: 1500mm
2. Feeding Guider & Straighten Device
1) The purpose is to guide the metal sheet into the roll forming machine and make sure the metal sheet at the correct position with the roll forming system.
2) It can be left and right adjusted by adjusting the screw. Also the left and right adjusting can be independent operating.
3) The five roller straighten leveling device is quenched and hard chrome coated to straighten the rough sheet and reduce the material strength for roll forming.
4) Motor for feeding and straighten device:5.5KW
3. Hydraulic System for Punching and Pre-cutting Device
1) This device consisted by punching mould, cutting blade, oil cylinder and hydraulic station.
2) Pre-cutting before roll forming which no need to change cutting mould.
3) Material of punching and cutting blade:Cr12Mov, quench hardness58-62
4) Power for cutting: Hydraulic power:7.5KW
4. Main Roll Forming Machine
1) Raw Material: forming thickness 1.0-4.0mm, Yield strength Q235 galvanized steel and hot rolled steel
2) Roll forming station: 15 stations
3)Rectify roll station: 2 stations
4) Axis Diameter: ∅85mm
5) Shaft material: 45# high grade steel
6) Roller material:Gcr15 bearing steel, forged and quenched hardnessHRC58-62
7) Roller process: CNC lathe processed, surface polished or black treated
8) The gap between upper layer rollers and bottom layer rollers can be adjusted by screw according to different thickness sheet.
9) The interchange from C to Z is only need to adjust two station rollers
10) Motor power:18.5KW
11) Transmission: High strength chain
12) Working speed:15-20m/min(Not including cutting time)
5. Electrical Control System
1) The whole line controlled by PLC control and frequency speed control to achieve automatic. The friendly interface can set the bath, product length and quantity.
2) PLC: Panasonic, Japan
3) Frequency control: YASKAWA, Japan, 18.5KW
4) Other low voltage: Schneider
5) Encoder: Omron
6) Operate panel: Touch screen
6. Run-out Table